GEOCLEAN® 200
Overview
GEOCLEAN® 200 is a heavy duty caustic cleaner with extra detergency and high soil load capacity providing superior cleaning capabilities. This cleaner is used at ambient temperatures, lowering operating and maintenance costs. The residual film will provide short-term rust protection on cast iron and ferrous parts. This cleaner has special water conditioners that prevent scale of the washers and water hardness from building up on equipment. The surfactant package is low foaming and free rinsing.
1.24
10.33
> 13
• Excellent cleaning on difficult soils
• Short term rust protection
• Oil rejecting
• Non-scaling
• Bio-resistant
• Low foaming
• Mild odor
• Applied by immersion
• Wash Stations: 3-10% by volume
• Temperature: Ambient to 180°F
Processing tanks, piping, pumps and heat transfer surfaces constructed of mild steel will provide satisfactory service life.
Initial charging of tank
1. Fill tank 4/5 with water.
2. Add the appropriate amount of GEOCLEAN® 200 with agitation.
3. Fill tank with water to operating level and heat to operating temperature.
Solution control
Materials Required:
• 10 ml pipette
• 125 ml glass beaker
• Burette assembly
• 1% Phenolphthalein
• 0.1N Acid
Titrating for Total Concentration:
1. Pipette a 10 ml sample of the bath into a 125 ml glass beaker.
2. Add 3-4 drops of 1% Phenolphthalein.
3. Titrate with 0.1N Acid until a change from pink to colorless.
This is the free alkalinity. Multiply the number of mls by 0.27 to get the percent GEOCLEAN® 200 concentration. (Example: 4 ml of 0.1N Acid equals 1.08% cleaning solution.)
Storage, safety and handling
Store indoors. Keep from freezing. Check your local, state and federal regulations on chemical storage to insure compliance.
Avoid contact with eyes and prolonged contact with skin. Wash thoroughly after handling.
Please read Safety Data Sheet (SDS) before use and refer to it for specific storage precautions not contained herein.
pds/geoclean-200/en/2025-12-06/