GEOCLEAN® 300
Overview
GEOCLEAN® 300 is a specially formulated mild liquid alkaline cleaner that is versative for a variety of cleaning operations and soils. This environmentally friendly cleaner has a low pH for safe handling, and is safe for most metals due to its corrosion inhibitors. GEOCLEAN® 300 can be used at ambient temperatures or heated to 150°F for more tenacious soils.
10.0
1.08
9.0
• Short term rust protection
• Oil rejecting
• Non-scaling
• Low foaming
• Mild odor
• Cleans at ambient temperatures
• Cleans at low concentrations
• Applied by immersion
• Wash Stations: 3-5% by volume
• Rinse Station: 2-4% by volume
• Temperature: Ambient to 150°F
Processing tanks, piping, pumps and heat transfer surfaces constructed of mild steel will provide satisfactory service life. Can be used in high-pressure spray, dip or vibratory systems.
Initial charging of tank
1. Fill tank 4/5 with water.
2. Add the appropriate amount of GEOCLEAN® 300 with agitation.
3. Fill tank with water to operating level and heat to operating temperature.
Solution control
Materials Required:
• 10 ml pipette
• 125 ml glass beaker
• Burette assembly
• 1% Phenolphthalein
• 0.1N Acid
Titrating for Total Concentration:
1. Pipette a 10 ml sample of the bath into a 125 ml glass beaker.
2. Add 3-4 drops of 1% Phenolphthalein.
3. Titrate with 0.1N Acid until a change from pink to colorless.
This is the free alkalinity. Multiply by the factor 2 for the concentration of GEOCLEAN® 300 concentration. (Example: 2.5 mL of 0.1N Hydrochloric Acid x 2 = 5% concentration.)
Storage, safety and handling
Store indoors. Keep from freezing. Check your local, state and federal regulations on chemical storage to insure compliance.
Avoid contact with eyes and prolonged contact with skin. Wash thoroughly after handling.
Please read Safety Data Sheet (SDS) before use and refer to it for specific storage precautions not contained herein.
pds/geoclean-300/en/2025-12-06/